| |
Type 2/Type 4 Non-Bullet Resistant Design  |
Standard Features:
- Magazine constructed with double wall, welded construction with 3” airspace throughout.
- Exterior walls made of 12-gauge, formed, Galvannealed Steel. Roof is either 12 (Fire Rated) or 18 gauge galvannealed steel.
-
Interior of structure lined with 1/2" Plywood (Floor 3/4" Plywood). All spark-producing material is covered or sealed.
- Door - 63”H x 42”W (M200 - 1200 Magazine).
Door - 80”H x 60”W (M1600 - M8000 Magazine).
Exterior Mounted Cam Lock. (2) Hooded Padlock Hasps at 45° Angle. Door made with an 1” overlap on all sides.
- Door Panels grounded to wall face.
- Multiple Static Grounding Connections.
- Lifting Lugs.
-
Removable Caster Assembly (800Lb. capacity per Caster) - or - I-Beam Base Support with Fork Channels.
- Hazard Labeling.
- Finish is a two-part chemical resistant aliphatic polyurethane.
|
|
|
|
| |
Type 2 Bullet Resistant Design |
Standard Features:
- Bullet Resistant Design Meets or exceeds ATF specs 27 CFR 555.11. (Pg. 75 ATF Ruling 76-18 (b)).
- Magazine constructed with double wall, welded construction with 3” airspace throughout.
-
Exterior walls made of 10-gauge, formed, Galvannealed Steel. Roof is either 12 (Fire Rated) or 18 gauge galvannealed steel.
- Interior walls made of 3/8” Steel Plate.
- Interior of structure lined with 1" Plywood (Ceiling 1/2" and Floor 3/4" Plywood). All spark-producing material is covered or sealed.
- Door – 63”H x 42”W (M200 - 1200 Magazine). Door – 80”H x 60”W (M1600 - M8000 Magazine). Exterior Mounted Cam Lock. (2) Hooded Padlock Hasps at 45° Angle. Door made of Bullet Resistant construction with a 1” overlap on all sides.
-
Door Panels grounded to wall face.
- Multiple Static Grounding Connections.
-
Inlet Vents for natural ventilation.
- Lifting Lugs.
- Removable Caster Assembly (800Lb. capacity per Caster) - or - I-Beam Base Support with Fork Channels.
- Hazard Labeling.
- Finish is a two-part chemical resistant aliphatic polyurethane.
|
| |
|
Type 3 Day Boxes |
|
Standard Features:
- Manufactured using 12 gauge steel(Singlewall Design).
- Interior of structure lined with 1/2" Plywood. All spark-producing material is covered or sealed.
-
Door - (1) Padlock Hasps at 45° Angle. Door made with an 1” overlap on all sides.
- Hinges and Hasps are attached by welding, riveting, or bolting (nuts on inside).
- (Note) Padlock not included with magazine. ATF states “One steel padlock (which need not be protected by a steel hood) having at least five tumblers and a case-hardened shackle of at least 3/8” diameter is sufficient for locking proposes.”
- ATF States “Explosive materials are not to be left unattended in type 3 magazines and must be removed to type 1 or 2 magazines for unattended storage.”
-
Finish is a two-part chemical resistant aliphatic polyurethane.
|
|
|
|
| |
| |
|
|
|
| NOTE: Magazine may require State Approval. Please check with your Local Authorities (ie: Fire Marshall) to determine if State Approval and/or State Seal are required. Additional charges and lead times may apply. |
FACEBOOK