0
Call Us - 888-326-7890 | CONNECT WITH US: FacebookLinkedIn

GIVE ME A CALL Call Me

Contact #

We will not use your contact info for promotional purposes.

Securall Magazines

Contact Us

 
 
 
 

Type 2 - Explosive Storage Magazine

Type 2 Magazines are made for the storage of High Explosives and are made for indoor or outdoor storage placement. Per ATF regulations an indoor magazine may not hold more than 50 Lbs. of explosive materials and outdoor magazines must be built to a bullet resistant design.

Our Explosive Storage Magazines are portable and can be placed in most locations with a flat surface. These magazines are built for turn-key installation which also allows for easy relocation if needed.

Type 2 Outdoor Magazine Bullet Resistant Design Meets or exceeds ATF specs 27 CFR 555.11. (Pg. 75 ATF Ruling 76-18 (b)).

Securall is the only Magazine Manufacturer currently offering an optional upgrade of 2 hour Fire-Rated Walls.

Type 2 magazines - Mobile and portable indoor and outdoor magazines for the storage of high explosives, subject to the limitations prescribed by §§§ 555.206, 555.208(b), and 555.213. Other classes of explosive materials may also be stored in type 2 magazines. Type 2 Outdoor magazines are to be bullet-resistant, fire-resistant, weather-resistant, theft-resistant, and ventilated. They are to be supported to prevent direct contact with the ground and, if less than one cubic yard in size, must be securely fastened to a fixed object.

Type 2 Indoor magazines are to be fire-resistant and theft-resistant. They need not be bullet-resistant and weather-resistant if the buildings in which they are stored provide protection from the weather and from bullet penetration. No indoor magazine is to be located in a residence or dwelling. The indoor storage of high explosives must not exceed a quantity of 50 pounds. More than one indoor magazine may be located in the same building if the total quantity of explosive materials stored does not exceed 50 pounds. Detonators must be stored in a separate magazine (except as provided in § 555.213) and the total quantity of detonators must not exceed 5,000.

** The product images shown are for illustration purposes only and may not be an exact representation of the product.

Standard Magazines

 

M100 EXPLOSIVE STORAGE

M100 - Explosive Magazine; Dimension 36" H x 36" W x 30" D ; Door Style - Single Door ; Non Bullet Resistant Design.
Meet or exceed federal standards developed by the ATF.

M100 Outdoor/Indoor Magazine

Dimension: 36" H x 36" W x 30" D
Door Style: Single Door
Approx Ship Weight: 350 Lbs.


Standard Features:
  • Magazine constructed with double wall, welded construction with 3” airspace throughout.
  • Exterior walls made of 12-gauge, formed, Galvannealed Steel. Roof is 16-gauge.
  • Interior of structure lined with 1/2" Plywood (Floor 3/4" Plywood). All spark-producing material is covered or sealed.
  • Door – Single Door. Exterior Mounted Cam Lock. (2) Hooded Padlock Hasps at 45° Angle. Door made with an 1” overlap on all sides.
  • Door Panels grounded to wall face.
  • Multiple Static Grounding Connections.
  • Lifting Lugs.
  • Removable Caster Assembly (800Lb. capacity per Caster) - or - I-Beam Base Support with Fork Channels.
  • Hazard Labeling.
  • Finish is a two-part chemical resistant aliphatic polyurethane.
Upgrade:
  • Bullet Resistant Design

Meets or exceeds ATF specs 27 CFR 555.11.
Approx Ship Weight: 850 Lbs.

Standard Features:
  • Bullet Resistant Design Meets or exceeds ATF specs 27 CFR 555.11. (Pg. 75 ATF Ruling 76-18 (b)).
  • Exterior walls made of 10-gauge, formed, Galvannealed Steel. Roof is 16-gauge.
  • Interior walls made of 3/8” Steel Plate.
  • Interior of structure lined with 1" Plywood (Ceiling 1/2" and Floor 3/4" Plywood). All spark-producing material is covered or sealed.
  • All the features of standard magazine.


  • Wooden Shelves, 14" Deep   linear ft.

     
 

M150 EXPLOSIVE STORAGE

M150 - Explosive Magazine; Dimension 60" H x 42" W x 36" D ; Door Style - Single Door ; Non Bullet Resistant Design.
Meet or exceed federal standards developed by the ATF.

M150 Outdoor/Indoor Magazine

Dimension: 60" H x 42" W x 36" D
Door Style: Single Door
Approx Ship Weight: 520 Lbs.


Standard Features:
  • Magazine constructed with double wall, welded construction with 3” airspace throughout.
  • Exterior walls made of 12-gauge, formed, Galvannealed Steel. Roof is 16-gauge.
  • Interior of structure lined with 1/2" Plywood (Floor 3/4" Plywood). All spark-producing material is covered or sealed.
  • Door – Single Door. Exterior Mounted Cam Lock. (2) Hooded Padlock Hasps at 45° Angle. Door made with an 1” overlap on all sides.
  • Door Panels grounded to wall face.
  • Multiple Static Grounding Connections.
  • Lifting Lugs.
  • Removable Caster Assembly (800Lb. capacity per Caster) - or - I-Beam Base Support with Fork Channels.
  • Hazard Labeling.
  • Finish is a two-part chemical resistant aliphatic polyurethane.
Upgrade:
  • Bullet Resistant Design

Meets or exceeds ATF specs 27 CFR 555.11.
Approx Ship Weight: 1275Lbs.

Standard Features:
  • Bullet Resistant Design Meets or exceeds ATF specs 27 CFR 555.11. (Pg. 75 ATF Ruling 76-18 (b)).
  • Exterior walls made of 10-gauge, formed, Galvannealed Steel. Roof is 16-gauge.
  • Interior walls made of 3/8” Steel Plate.
  • Interior of structure lined with 1" Plywood (Ceiling 1/2" and Floor 3/4" Plywood). All spark-producing material is covered or sealed.
  • All the features of standard magazine.


  • Wooden Shelves, 14" Deep   linear ft.

     
 

M180 EXPLOSIVE STORAGE

M180 - Explosive Magazine; Dimension 72" H x 60" W x 42" D ; Door Style - Single Door ; Non Bullet Resistant Design.
Meet or exceed federal standards developed by the ATF.

M180 Outdoor/Indoor Magazine

Dimension: 72" H x 60" W x 42" D
Door Style: Single Door
Approx Ship Weight: 1050 Lbs.


Standard Features:
  • Magazine constructed with double wall, welded construction with 3” airspace throughout.
  • Exterior walls made of 12-gauge, formed, Galvannealed Steel. Roof is 16-gauge.
  • Interior of structure lined with 1/2" Plywood (Floor 3/4" Plywood). All spark-producing material is covered or sealed.
  • Door – Single Door. Exterior Mounted Cam Lock. (2) Hooded Padlock Hasps at 45° Angle. Door made with an 1” overlap on all sides.
  • Door Panels grounded to wall face.
  • Multiple Static Grounding Connections.
  • Lifting Lugs.
  • Removable Caster Assembly (800Lb. capacity per Caster) - or - I-Beam Base Support with Fork Channels.
  • Hazard Labeling.
  • Finish is a two-part chemical resistant aliphatic polyurethane.
Upgrade:
  • Bullet Resistant Design

Meets or exceeds ATF specs 27 CFR 555.11.
Approx Ship Weight: 3,500 Lbs.

Standard Features:
  • Bullet Resistant Design Meets or exceeds ATF specs 27 CFR 555.11. (Pg. 75 ATF Ruling 76-18 (b)).
  • Exterior walls made of 10-gauge, formed, Galvannealed Steel. Roof is 16-gauge.
  • Interior walls made of 3/8” Steel Plate.
  • Interior of structure lined with 1" Plywood (Ceiling 1/2" and Floor 3/4" Plywood). All spark-producing material is covered or sealed.
  • All the features of standard magazine.


  • Wooden Shelves, 14" Deep   linear ft.

     
 

M200 EXPLOSIVE STORAGE

M200 - Explosive Magazine; Dimension 6'11" H x 5' W x 3'6" D ; Door Style - 1 - 42" W x 63" H door; Non Bullet Resistant Design.
Meet or exceed federal standards developed by the ATF.

M200 Outdoor/Indoor Magazine

Dimension: 6'11" H x 5' W x 3'6" D
Door Style: 1 - 42" W x 63" H door
Approx Ship Weight: 988 Lbs.


Standard Features:
  • Magazine constructed with double wall, welded construction with 3” airspace throughout.
  • Exterior walls made of 12-gauge, formed, Galvannealed Steel. Roof is 16-gauge.
  • Interior of structure lined with 1/2" Plywood (Floor 3/4" Plywood). All spark-producing material is covered or sealed.
  • Door – 63”H x 42”W. Exterior Mounted Cam Lock. (2) Hooded Padlock Hasps at 45° Angle. Door made with an 1” overlap on all sides.
  • Door Panels grounded to wall face.
  • Multiple Static Grounding Connections.
  • Lifting Lugs.
  • Removable Caster Assembly (800Lb. capacity per Caster) - or - I-Beam Base Support with Fork Channels.
  • Hazard Labeling.
  • Finish is a two-part chemical resistant aliphatic polyurethane.
Upgrade:
  • Bullet Resistant Design

Meets or exceeds ATF specs 27 CFR 555.11.
Approx Ship Weight: 4,301 Lbs.

Standard Features:
  • Bullet Resistant Design Meets or exceeds ATF specs 27 CFR 555.11. (Pg. 75 ATF Ruling 76-18 (b)).
  • Exterior walls made of 10-gauge, formed, Galvannealed Steel. Roof is 16-gauge.
  • Interior walls made of 3/8” Steel Plate.
  • Interior of structure lined with 1" Plywood (Ceiling 1/2" and Floor 3/4" Plywood). All spark-producing material is covered or sealed.
  • All the features of standard magazine.


  • 2 Hrs fire rated wall.

  • Wooden Shelves, 14" Deep   linear ft.

     

 M400 EXPLOSIVE STORAGE

M400 Explosive Magazine; Dimension 6'11"H x 5'W x 5'D; Door Style - 1 - 42" W x 63" H door; Non Bullet Resistant Design.
Meet or exceed federal standards developed by the ATF.

M400 Outdoor/Indoor Magazine

Dimension 6'11"H x 5'W x 5'D
Door Style - 1 - 42" W x 63" H door
Approx Ship Weight: 1,177 Lbs.


Standard Features:
  • Magazine constructed with double wall, welded construction with 3” airspace throughout.
  • Exterior walls made of 12-gauge, formed, Galvannealed Steel. Roof is 16-gauge.
  • Interior of structure lined with 1/2" Plywood (Floor 3/4" Plywood). All spark-producing material is covered or sealed.
  • Door – 63”H x 42”W. Exterior Mounted Cam Lock. (2) Hooded Padlock Hasps at 45° Angle. Door made with an 1” overlap on all sides.
  • Door Panels grounded to wall face.
  • Multiple Static Grounding Connections.
  • Lifting Lugs.
  • Removable Caster Assembly (800Lb. capacity per Caster) - or - I-Beam Base Support with Fork Channels.
  • Hazard Labeling.
  • Finish is a two-part chemical resistant aliphatic polyurethane.

Upgrade:
  • Bullet Resistant Design

Meets or exceeds ATF specs 27 CFR 555.11.
Approx Ship Weight: 4,906 Lbs.

Standard Features:
  • Bullet Resistant Design Meets or exceeds ATF specs 27 CFR 555.11. (Pg. 75 ATF Ruling 76-18 (b)).
  • Exterior walls made of 10-gauge, formed, Galvannealed Steel. Roof is 16-gauge.
  • Interior walls made of 3/8” Steel Plate.
  • Interior of structure lined with 1" Plywood (Ceiling 1/2" and Floor 3/4" Plywood). All spark-producing material is covered or sealed.
  • All the features of standard magazine.
 
  • 2 Hrs fire rated wall.

  • Wooden Shelves, 14" Deep   linear ft.

     

 M600 EXPLOSIVE STORAGE

M600 Explosive Magazine; Dimension 8'4"H x 7'W x 5'D; Door Style - 1 - 42" W x 80" H door; Non Bullet Resistant Design.
Meet or exceed federal standards developed by the ATF.
   

M600 Outdoor/Indoor Magazine

Dimension 8'4"H x 7'W x 5'D
Door Style - 1 - 42" W x 63" H door
Approx Ship Weight: 1,621 Lbs.


Standard Features:
  • Magazine constructed with double wall, welded construction with 3” airspace throughout.
  • Exterior walls made of 12-gauge, formed, Galvannealed Steel. Roof is 16-gauge.
  • Interior of structure lined with 1/2" Plywood (Floor 3/4" Plywood). All spark-producing material is covered or sealed.
  • Door – 63”H x 42”W. Exterior Mounted Cam Lock. (2) Hooded Padlock Hasps at 45° Angle. Door made with an 1” overlap on all sides.
  • Door Panels grounded to wall face.
  • Multiple Static Grounding Connections.
  • Lifting Lugs.
  • Removable Caster Assembly (800Lb. capacity per Caster) - or - I-Beam Base Support with Fork Channels.
  • Hazard Labeling.
  • Finish is a two-part chemical resistant aliphatic polyurethane.

Upgrade:
  • Bullet Resistant Design

Meets or exceeds ATF specs 27 CFR 555.11.
Approx Ship Weight: 5,752 Lbs.

Standard Features:
  • Bullet Resistant Design Meets or exceeds ATF specs 27 CFR 555.11. (Pg. 75 ATF Ruling 76-18 (b)).
  • Exterior walls made of 10-gauge, formed, Galvannealed Steel. Roof is 16-gauge.
  • Interior walls made of 3/8” Steel Plate.
  • Interior of structure lined with 1" Plywood (Ceiling 1/2" and Floor 3/4" Plywood). All spark-producing material is covered or sealed.

  • 2 Hrs fire rated wall.

  • Wooden Shelves, 14" Deep   linear ft.
   

 M900 EXPLOSIVE STORAGE

M900 Explosive Magazine; Dimension 8'4"H x 7'W x 7'D; Approx. Ship. Wt. 2,159.4 Lbs.; Door Style - 1 - 42" W x 80" H door; Non Bullet Resistant Design.
Meet or exceed federal standards developed by the ATF.

M900 Outdoor/Indoor Magazine

Dimension 8'4"H x 7'W x 7'D
Door Style - 1 - 42" W x 63" H door
Approx Ship Weight: 2,650 Lbs.


Standard Features:
  • Magazine constructed with double wall, welded construction with 3” airspace throughout.
  • Exterior walls made of 12-gauge, formed, Galvannealed Steel. Roof is 16-gauge.
  • Interior of structure lined with 1/2" Plywood (Floor 3/4" Plywood). All spark-producing material is covered or sealed.
  • Door – 63”H x 42”W. Exterior Mounted Cam Lock. (2) Hooded Padlock Hasps at 45° Angle. Door made with an 1” overlap on all sides.
  • Door Panels grounded to wall face.
  • Multiple Static Grounding Connections.
  • Lifting Lugs.
  • Removable Caster Assembly (800Lb. capacity per Caster) - or - I-Beam Base Support with Fork Channels.
  • Hazard Labeling.
  • Finish is a two-part chemical resistant aliphatic polyurethane.

Upgrade:
  • Bullet Resistant Design

Meets or exceeds ATF specs 27 CFR 555.11.
Approx Ship Weight: 7,524 Lbs.

Standard Features:
  • Bullet Resistant Design Meets or exceeds ATF specs 27 CFR 555.11. (Pg. 75 ATF Ruling 76-18 (b)).
  • Exterior walls made of 10-gauge, formed, Galvannealed Steel. Roof is 16-gauge.
  • Interior walls made of 3/8” Steel Plate.
  • Interior of structure lined with 1" Plywood (Ceiling 1/2" and Floor 3/4" Plywood). All spark-producing material is covered or sealed.
  • All the features of standard magazine.



  • 2 Hrs fire rated wall.

  • Wooden Shelves, 14" Deep   linear ft.

     

Shown with custom double door

 M1200 EXPLOSIVE STORAGE

M1200 Explosive Magazine; Dimension 8'4"H x 7'W x 9'D; Door Style - 1 - 42" W x 80" H door; Non Bullet Resistant Design.
Meet or exceed federal standards developed by the ATF.

M1200 Outdoor/Indoor Magazine

Dimension 8'4"H x 7'W x 9'D
Door Style - 1 - 42" W x 63 " H door
Approx Ship Weight: 3,059 Lbs.


Standard Features:
  • Magazine constructed with double wall, welded construction with 3” airspace throughout.
  • Exterior walls made of 12-gauge, formed, Galvannealed Steel. Roof is 16-gauge.
  • Interior of structure lined with 1/2" Plywood (Floor 3/4" Plywood). All spark-producing material is covered or sealed.
  • Door – 63”H x 42”W. Exterior Mounted Cam Lock. (2) Hooded Padlock Hasps at 45° Angle. Door made with an 1” overlap on all sides.
  • Door Panels grounded to wall face.
  • Multiple Static Grounding Connections.
  • Lifting Lugs.
  • Removable Caster Assembly (800Lb. capacity per Caster) - or - I-Beam Base Support with Fork Channels.
  • Hazard Labeling.
  • Finish is a two-part chemical resistant aliphatic polyurethane.

Upgrade:
  • Bullet Resistant Design

Meets or exceeds ATF specs 27 CFR 555.11.
Approx Ship Weight: 8,572 Lbs.

Standard Features:
  • Bullet Resistant Design Meets or exceeds ATF specs 27 CFR 555.11. (Pg. 75 ATF Ruling 76-18 (b)).
  • Exterior walls made of 10-gauge, formed, Galvannealed Steel. Roof is 16-gauge.
  • Interior walls made of 3/8” Steel Plate.
  • Interior of structure lined with 1" Plywood (Ceiling 1/2" and Floor 3/4" Plywood). All spark-producing material is covered or sealed.
  • All the features of standard magazine.



  • 2 Hrs fire rated wall.

  • Wooden Shelves, 14" Deep   linear ft.

     

 M1600 EXPLOSIVE STORAGE

M1600 Explosive Magazine; Dimension 8'4" " H x 10' W x 8' D; Door Style - 1 - 60" W x 80" H door; Non Bullet Resistant Design.
Meet or exceed federal standards developed by the ATF.

M1600 Outdoor/Indoor Magazine

Dimension 8'4" " H x 10' W x 8' D
Door Style - 1 - 60" W x 80" H door
Approx Ship Weight: 3,789 Lbs.


Standard Features:
  • Magazine constructed with double wall, welded construction with 3” airspace throughout.
  • Exterior walls made of 12-gauge, formed, Galvannealed Steel. Roof is 16-gauge.
  • Interior of structure lined with 1" Plywood (Ceiling 1/2" and Floor 3/4" Plywood). All spark-producing material is covered or sealed.
  • Door – 80”H x 60”W. Exterior Mounted Cam Lock. (2) Hooded Padlock Hasps at 45° Angle. Door made with an 1” overlap on all sides.
  • Door Panels grounded to wall face.
  • Multiple Static Grounding Connections.
  • Lifting Lugs.
  • I-Beam Base Support with Fork Channels.
  • Hazard Labeling.
  • Finish is a two-part chemical resistant aliphatic polyurethane.

Upgrade:
  • Bullet Resistant Design

Meets or exceeds ATF specs 27 CFR 555.11.
Approx Ship Weight: 10,018 Lbs.

Standard Features:
  • Bullet Resistant Design Meets or exceeds ATF specs 27 CFR 555.11. (Pg. 75 ATF Ruling 76-18 (b)).
  • Exterior walls made of 10-gauge, formed, Galvannealed Steel. Roof is 16-gauge.
  • Interior walls made of 3/8” Steel Plate.
  • Interior of structure lined with 1" Plywood (Ceiling 1/2" and Floor 3/4" Plywood). All spark-producing material is covered or sealed.
  • All the features of standard magazine.



  • 2 Hrs fire rated wall.

  • Wooden Shelves, 14" Deep   linear ft.

     

 M2400 EXPLOSIVE STORAGE

M2400 Explosive Magazine; Dimension 8'4"H x 14'W x 8'D; Door Style - 1 - 60" W x 80" H door; Non Bullet Resistant Design.
Meet or exceed federal standards developed by the ATF.

M2400 Outdoor/Indoor Magazine

Dimension 8'4"H x 14'W x 8'D
Door Style - 1 - 60" W x 80" H door
Approx Ship Weight: 4,809 Lbs.


Standard Features:
  • Magazine constructed with double wall, welded construction with 3” airspace throughout.
  • Exterior walls made of 12-gauge, formed, Galvannealed Steel. Roof is 16-gauge.
  • Interior of structure lined with 1" Plywood (Ceiling 1/2" and Floor 3/4" Plywood). All spark-producing material is covered or sealed.
  • Door – 80”H x 60”W. Exterior Mounted Cam Lock. (2) Hooded Padlock Hasps at 45° Angle. Door made with an 1” overlap on all sides.
  • Door Panels grounded to wall face.
  • Multiple Static Grounding Connections.
  • Lifting Lugs.
  • I-Beam Base Support with Fork Channels.
  • Hazard Labeling.
  • Finish is a two-part chemical resistant aliphatic polyurethane.

Upgrade:
  • Bullet Resistant Design

Meets or exceeds ATF specs 27 CFR 555.11.
Approx Ship Weight: 12,307 Lbs.

Standard Features:
  • Bullet Resistant Design Meets or exceeds ATF specs 27 CFR 555.11. (Pg. 75 ATF Ruling 76-18 (b)).
  • Exterior walls made of 10-gauge, formed, Galvannealed Steel. Roof is 16-gauge.
  • Interior walls made of 3/8” Steel Plate.
  • Interior of structure lined with 1" Plywood (Ceiling 1/2" and Floor 3/4" Plywood). All spark-producing material is covered or sealed.
  • All the features of standard magazine.



  • 2 Hrs fire rated wall.

  • Wooden Shelves, 14" Deep   linear ft.

     

 M3200 EXPLOSIVE STORAGE

M3200 Explosive Magazine; Dimension 8'4"H x 18'W x 8'D; Door Style - 1 - 60" W x 80" H door; Non Bullet Resistant Design.
Meet or exceed federal standards developed by the ATF.

M3200 Outdoor/Indoor Magazine

Dimension 8'4"H x 18'W x 8'D
Door Style - 1 - 60" W x 80" H door
Approx Ship Weight: 5,992 Lbs.


Standard Features:
  • Magazine constructed with double wall, welded construction with 3” airspace throughout.
  • Exterior walls made of 12-gauge, formed, Galvannealed Steel. Roof is 16-gauge.
  • Interior of structure lined with 1" Plywood (Ceiling 1/2" and Floor 3/4" Plywood). All spark-producing material is covered or sealed.
  • Door – 80”H x 60”W. Exterior Mounted Cam Lock. (2) Hooded Padlock Hasps at 45° Angle. Door made with an 1” overlap on all sides.
  • Door Panels grounded to wall face.
  • Multiple Static Grounding Connections.
  • Lifting Lugs.
  • I-Beam Base Support with Fork Channels.
  • Hazard Labeling.
  • Finish is a two-part chemical resistant aliphatic polyurethane.

Upgrade:
  • Bullet Resistant Design

Meets or exceeds ATF specs 27 CFR 555.11.
Approx Ship Weight: 14,809 Lbs.

Standard Features:
  • Bullet Resistant Design Meets or exceeds ATF specs 27 CFR 555.11. (Pg. 75 ATF Ruling 76-18 (b)).
  • Exterior walls made of 10-gauge, formed, Galvannealed Steel. Roof is 16-gauge.
  • Interior walls made of 3/8” Steel Plate.
  • Interior of structure lined with 1" Plywood (Ceiling 1/2" and Floor 3/4" Plywood). All spark-producing material is covered or sealed.
  • All the features of standard magazine.



  • 2 Hrs fire rated wall.

  • Wooden Shelves, 14" Deep   linear ft.

     

 M3800 EXPLOSIVE STORAGE

M3800 Explosive Magazine; Dimension 8'4"H x 22'W x 8'D; Door Style - 1 - 60" W x 80" H door; Non Bullet Resistant Design.
Meet or exceed federal standards developed by the ATF.

M3800 Outdoor/Indoor Magazine

Non Bullet Resistant Design
Dimension 8'4"H x 22'W x 8'D
Door Style - 1 - 60" W x 80" H door
Approx Ship Weight: 6,965 Lbs.


Standard Features:
  • Magazine constructed with double wall, welded construction with 3” airspace throughout.
  • Exterior walls made of 12-gauge, formed, Galvannealed Steel. Roof is 16-gauge.
  • Interior of structure lined with 1" Plywood (Ceiling 1/2" and Floor 3/4" Plywood). All spark-producing material is covered or sealed.
  • Door – 80”H x 60”W. Exterior Mounted Cam Lock. (2) Hooded Padlock Hasps at 45° Angle. Door made with an 1” overlap on all sides.
  • Door Panels grounded to wall face.
  • Multiple Static Grounding Connections.
  • Lifting Lugs.
  • I-Beam Base Support with Fork Channels.
  • Hazard Labeling.
  • Finish is a two-part chemical resistant aliphatic polyurethane.

Upgrade:
  • Bullet Resistant Design

Meets or exceeds ATF specs 27 CFR 555.11.
Approx Ship Weight: 17,039 Lbs.

Standard Features:
  • Bullet Resistant Design Meets or exceeds ATF specs 27 CFR 555.11. (Pg. 75 ATF Ruling 76-18 (b)).
  • Exterior walls made of 10-gauge, formed, Galvannealed Steel. Roof is 16-gauge.
  • Interior walls made of 3/8” Steel Plate.
  • Interior of structure lined with 1" Plywood (Ceiling 1/2" and Floor 3/4" Plywood). All spark-producing material is covered or sealed.
  • All the features of standard magazine.



  • 2 Hrs fire rated wall.

  • Wooden Shelves, 14" Deep   linear ft.

     

 M4800 EXPLOSIVE STORAGE

M4800 Explosive Magazine; Dimension 8'4"H x 26'W x 8'D; Door Style - 1 - 60" W x 80" H door; Non Bullet Resistant Design.
Meet or exceed federal standards developed by the ATF.

M4800 Outdoor/Indoor Magazine

Dimension 8'4"H x 26'W x 8'D
Door Style - 1 - 60" W x 80" H door
Approx Ship Weight: 8,701 Lbs.


Standard Features:
  • Magazine constructed with double wall, welded construction with 3” airspace throughout.
  • Exterior walls made of 12-gauge, formed, Galvannealed Steel. Roof is 16-gauge.
  • Interior of structure lined with 1" Plywood (Ceiling 1/2" and Floor 3/4" Plywood). All spark-producing material is covered or sealed.
  • Door – 80”H x 60”W. Exterior Mounted Cam Lock. (2) Hooded Padlock Hasps at 45° Angle. Door made with an 1” overlap on all sides.
  • Door Panels grounded to wall face.
  • Multiple Static Grounding Connections.
  • Lifting Lugs.
  • I-Beam Base Support with Fork Channels.
  • Hazard Labeling.
  • Finish is a two-part chemical resistant aliphatic polyurethane.

Upgrade:
  • Bullet Resistant Design

Meets or exceeds ATF specs 27 CFR 555.11.
Approx Ship Weight: 19,786 Lbs.

Standard Features:
  • Bullet Resistant Design Meets or exceeds ATF specs 27 CFR 555.11. (Pg. 75 ATF Ruling 76-18 (b)).
  • Exterior walls made of 10-gauge, formed, Galvannealed Steel. Roof is 16-gauge.
  • Interior walls made of 3/8” Steel Plate.
  • Interior of structure lined with 1" Plywood (Ceiling 1/2" and Floor 3/4" Plywood). All spark-producing material is covered or sealed.
  • All the features of standard magazine.



  • 2 Hrs fire rated wall.

  • Wooden Shelves, 14" Deep   linear ft.

 
     

 M6400 EXPLOSIVE STORAGE

M6400 Explosive Magazine; Dimension 8'4"H x 34'W x 8'D; Door Style - 1 - 60" W x 80" H door; Non Bullet Resistant Design.
Meet or exceed federal standards developed by the ATF.

M6400 Outdoor/Indoor Magazine

Dimension 8'4"H x 34'W x 8'D
Door Style - 1 - 60" W x 80" H door
Approx Ship Weight: 10,923 Lbs.


Standard Features:
  • Magazine constructed with double wall, welded construction with 3” airspace throughout.
  • Exterior walls made of 12-gauge, formed, Galvannealed Steel. Roof is 16-gauge.
  • Interior of structure lined with 1" Plywood (Ceiling 1/2" and Floor 3/4" Plywood). All spark-producing material is covered or sealed.
  • Door – 80”H x 60”W. Exterior Mounted Cam Lock. (2) Hooded Padlock Hasps at 45° Angle. Door made with an 1” overlap on all sides.
  • Door Panels grounded to wall face.
  • Multiple Static Grounding Connections.
  • Lifting Lugs.
  • I-Beam Base Support with Fork Channels.
  • Hazard Labeling.
  • Finish is a two-part chemical resistant aliphatic polyurethane.

Upgrade:
  • Bullet Resistant Design

Meets or exceeds ATF specs 27 CFR 555.11.
Approx Ship Weight: 24,517 Lbs.

Standard Features:
  • Bullet Resistant Design Meets or exceeds ATF specs 27 CFR 555.11. (Pg. 75 ATF Ruling 76-18 (b)).
  • Exterior walls made of 10-gauge, formed, Galvannealed Steel. Roof is 16-gauge.
  • Interior walls made of 3/8” Steel Plate.
  • Interior of structure lined with 1" Plywood (Ceiling 1/2" and Floor 3/4" Plywood). All spark-producing material is covered or sealed.
  • All the features of standard magazine.



  • 2 Hrs fire rated wall.

  • Wooden Shelves, 14" Deep   linear ft.

     

 M8000 EXPLOSIVE STORAGE

M8000 Explosive Magazine; Dimension 8'4"H x 42'W x 8'D; Door Style - 1 - 60" W x 80" H door; Non Bullet Resistant Design.
Meet or exceed federal standards developed by the ATF.

M8000 Outdoor/Indoor Magazine

Non Bullet Resistant Design
Dimension 8'4"H x 42'W x 8'D
Door Style - 1 - 60" W x 80" H door
Approx Ship Weight: 13,144 Lbs.


Standard Features:
  • Magazine constructed with double wall, welded construction with 3” airspace throughout.
  • Exterior walls made of 12-gauge, formed, Galvannealed Steel. Roof is 16-gauge.
  • Interior of structure lined with 1" Plywood (Ceiling 1/2" and Floor 3/4" Plywood). All spark-producing material is covered or sealed.
  • Door – 80”H x 60”W. Exterior Mounted Cam Lock. (2) Hooded Padlock Hasps at 45° Angle. Door made with an 1” overlap on all sides.
  • Door Panels grounded to wall face.
  • Multiple Static Grounding Connections.
  • Lifting Lugs.
  • I-Beam Base Support with Fork Channels.
  • Hazard Labeling.
  • Finish is a two-part chemical resistant aliphatic polyurethane.

Upgrade:
  • Bullet Resistant Design

Meets or exceeds ATF specs 27 CFR 555.11.
Approx Ship Weight: 29,249 Lbs.

Standard Features:
  • Bullet Resistant Design Meets or exceeds ATF specs 27 CFR 555.11. (Pg. 75 ATF Ruling 76-18 (b)).
  • Exterior walls made of 10-gauge, formed, Galvannealed Steel. Roof is 16-gauge.
  • Interior walls made of 3/8” Steel Plate.
  • Interior of structure lined with 1" Plywood (Ceiling 1/2" and Floor 3/4" Plywood). All spark-producing material is covered or sealed.
  • All the features of standard magazine.



  • 2 Hrs fire rated wall.

  • Wooden Shelves, 14" Deep   linear ft.

   
NOTE: Magazine may require State Approval. Please check with your Local Authorities (ie: Fire Marshall) to determine if State Approval and/or State Seal are required. Additional charges and lead times may apply.
 
 
TYPE 2 MAGAZINES                              Picture Gallery    FACEBOOK                  A&A Sheet Metal Products, Inc.
5122 North State Road 39
LaPorte, IN 46350
Phone: 219-326-7890
Fax: 219-324-3780
TYPE 3 MAGAZINES  OPTIONS   LINKEDIN
TYPE 4 MAGAZINES  STANDARD FEATURES   TWITTER
CUSTOM MAGAZINE - FORM CONTACT US   MANTA ©2015 Securall. ALL RIGHTS RESERVED