0
Call Us - 888-326-7890 | CONNECT WITH US: FacebookLinkedIn

GIVE ME A CALL Call Me

Contact #

We will not use your contact info for promotional purposes.

Securall Magazines

Contact Us

 
 
 
 

Type 3 - Explosive Storage Magazine

Commonly called Day Boxes these magazines are designed to secure smaller amounts of explosives for use in the field. Day Boxes are easily portable and can serve to safely transport and store explosives to and from the work site. These can be mounted to a vehicle or trailer if desired, or left free standing to be carried. Units are manufactured with a 12 Gauge, single wall construction lined with a non-sparking material.

A type 3 magazine is a “day-box” or other portable magazine. It must be fire-resistant, weather-resistant, and theft-resistant. A type 3 magazine is to be constructed of not less than number 12-gauge (.1046 inches) steel, lined with at least either 1⁄2" plywood or 1⁄2" Masonite-type hardboard. Doors must overlap sides by at least one inch. Hinges and hasps are to be attached by welding, riveting or bolting (nuts on inside). One steel padlock (which need not be protected by a steel hood) having at least five tumblers and a case-hardened shackle of at least 3⁄8" diameter is sufficient for locking purposes. Explosive materials are not to be left unattended in type 3 magazines and must be removed to type 1 or 2 magazines for unattended storage.

   
 
   
 
Standard Features:
  • Manufactured using 12 gauge steel (Singlewall Design).
  • Interior of structure lined with 1/2" Plywood. All spark-producing material is covered or sealed.
  • Door - (1) Padlock Hasps at 45° Angle. Door made with an 1” overlap on all sides.
  • Hinges and Hasps are attached by welding, riveting, or bolting (nuts on inside).
  • (Note) Padlock not included with magazine. ATF states “One steel padlock (which need not be protected by a steel hood) having at least five tumblers and a case-hardened shackle of at least 3/8” diameter is sufficient for locking proposes.”
  • ATF States “Explosive materials are not to be left unattended in type 3 magazines and must be removed to type 1 or 2 magazines for unattended storage.”
  • Finish is a two-part chemical resistant aliphatic polyurethane.

 

 
 
TYPE 2 MAGAZINES                              Picture Gallery    FACEBOOK                  A&A Sheet Metal Products, Inc.
5122 North State Road 39
LaPorte, IN 46350
Phone: 219-326-7890
Fax: 219-324-3780
TYPE 3 MAGAZINES  OPTIONS   LINKEDIN
TYPE 4 MAGAZINES  STANDARD FEATURES   TWITTER
CUSTOM MAGAZINE - FORM CONTACT US   MANTA ©2015 Securall. ALL RIGHTS RESERVED